+91 7755905375 / +91 9156095924 | response@servofeeder.in
Coil Straightener
- Single straightener is used mainly to straightening the coil material.
- Most of the coil which are having thickness of 3-4 mm, faces challenges in cutting tools when the coil is not straight.
- Single straightener come with an advance solution. Straighter models are flexible i.e. as per the application of coil we deliver straightener.
- We as perfect coil handling understands customer requirement and has different variations in straightener models.
- coil thickness below 1.0 mm does not required straightener so we are having straighteners from 1.0 mm thickness to 5 mm thickness as per customer requirements.
- Some specifications are as follows
- Front and back horizontal guide supports for coil.
- Suitable models for different coil thickness and width.
- Straightening rollers are grinded hardened in thermal process with 57 to 58 HRC & hard chrome plated thereafter.
- If the coil thickness is lesser than 1.0 mm then we use Antenna type sensor hence, we the coil thickness gets higher then we use limit arm sensor.
- Geared Motor mounted inside the base is of 2.0 HP Motor, Size 3”, Gear box, Chain Driven given in base model.
- Standard control panel 2.0 Hp used for Single Straightener in base model, VFD control panel is also available on special purposes which helps in speed variation.
- 1 Set of pinch roller & 7/9 Nos of straightening rollers functions straightening of coil material. For higher thickness and coil width - pneumatic pinch roller is used which keeps pressure of coil through pneumatic cylinders.
- Gang housing given on the top of the straightener for the alignment of straightening rollers up to coil thickness 2.5 mm and individual housing for roller adjustment beyond thickness 2.5 mm.
